Custom Litz Braided XLR II
Pair of interlinks using our own proprietary wire, 15awg per wire using 3 wires for each cable wrapped with nylon cord. The interlinks can be ordered with any connectors through our TABERNA.
Pair of interlinks using our own proprietary wire, 15awg per wire using 3 wires for each cable wrapped with nylon cord. The interlinks can be ordered with any connectors through our TABERNA.
Pair of interlinks using our own proprietary wire, 15awg per wire using 3 wires for each cable wrapped with nylon cord. The interlinks can be ordered with any connectors through our TABERNA.
Design of the Wire
The design process for this wiring took over half a year, involving multiple prototypes, with the ultimate goal of creating a transparent, crystal clear wire. To achieve this, Litz technology was employed to minimize skin effect and proximity effect losses in conductors at frequencies up to approximately 1 MHz. The signal wiring consists of 39 strands of superfine Type 1 Litz pure silver 5N (99.999X) UPOCC, which was selected for its exceptional quality. This conductor is encased in a layer of fluoropolymer tetrafluoroethylene, chosen for its superior electrical properties and low dielectric constant of 2.1, which remains consistent across temperature and frequency variations. For shielding, a silver-plated high purity copper was deemed to be as effective as pure silver, and was used for its 100% coverage of the signal wire. The silver-plated 6N (99.9999X%) copper consists of 89 strands wrapped around the signal wire, yielding a total cross-sectional area of 15AWG. The individual strands are coated in an insulating enamel and are further insulated by a layer of silicone.
Cable Design
Material: 5N Monocrystalline Pure Silver
Insulator: PTFE/SILICONE
Core Structure: Inner core Litz type 1 - 5N UP-OCC Monocrystalline (39*0.08) & Outer layer 6N OCC Silver plated pure copper (89*0.08)
Connectors Specification
Viborg -
Pins Material: Pure silver (99.998%)
Insulation: PTFE
Body material: Aluminium and carbon fiber
-
Viablue-
Pins Material: Gold plated brass
Body material: Aluminium
-
Furutech -
Pins Material: 24k Gold Plated Brass
Insulation: PBT fiberglass
Anti-Magnetism Treatment FURUTECH Alpha α
Cryo Treated
-
Aeco -
Pins Material: tellurium copper over 99% copper (gold plated)
Insulation: PTFE
Body material: :Brass alloy
-
Custom Tellurium -
Pins Material: Tellurium Copper (Silver plated)
Body material: Chrome plated aluminium alloy
Insulation: PTFE
-
Neutrik -
Pins Material: Bronze Gold plated
Body material: Zinc diecast (Black chromium plating)
Insulation: Polyamide
